shell cover
英 [ʃel ˈkʌvə(r)]
美 [ʃel ˈkʌvər]
网络 壳盖
双语例句
- When the drinker puts down or carries the cup, the iron rod in the jacket shell rolls using a slope on the bottom of the jacket shell, and the plastic cover sheet covers the cup naturally again.
当喝水者放下或端平杯子时，套壳内的铁棒利用套壳底部的斜面滚动，塑料盖片复又自然盖住杯子。 - Lamp shell surface cover ring for standard size, suitable for all kinds of lamps installation;
灯壳面盖环为标准尺寸，适合各种灯具的安装装配； - Block copolymerization polypropylene ( PP1340) was chosed to produce storage battery shell and cover by injection molding through product designing, mould designing, forming techniques etc.
采用国内批量生产的嵌段共聚聚丙烯（PP1340），通过制品设计、模具设计和工艺设计，采用注射成型工艺研制出PP蓄电池壳盖。 - The flume shell is pushed upwards, and the shower sprays water when the external cover ( 2) is rotated clockwise.
顺时针旋转外盖（2），水槽壳体向上方推动复位，淋浴器喷水。 - The more accurate mold different from others is built up for finite element calculation of dryers, which simulates the contact status of shell and cover flange well.
建立了不同于其他有限元计算模型的更精确的烘缸计算模型。 - In addition, upper extreme of the pump body is permanently provided with a hanging ring device; bottoms of the pump end shell cover and of the back cover are provided with adsorption devices.
另外在泵体上端固定有提手装置，且在泵端盖、后盖的底部设置有吸附装置。 - The utility model comprises a shell, a top cover, an upper cover, a left porous commutation cylinder, a right commutation cylinder, a wire netting commutation cylinder and a lower cover.
它包括壳体、顶盖、上盖、左多孔整流筒、右多孔整流筒、金属丝网整流筒、下盖。 - The shell and cover of the radiation tube heating furnace.
辐射管加热炉的炉壳及炉盖； - Travel switch from the shell ( shell, cover), transmission head and flameproof budge switch etc.
行程开关由外壳（壳体，盖），传动头和隔爆型微动开关等组成。 - The utility model uses lever principle, when a drinker inclines a cup, the iron rod in the plastic jacket shell rolls to open the plastic cover sheet, and the drinker can drink water.
它利用杠杆原理，当喝水者倾斜杯子的瞬间，塑料套壳内的铁棒滚动时打开塑料盖片，喝水者即可喝水。 - Some firms, like Marks& Spencer and Royal Dutch Shell, even have earnings that cover their dividend payouts more than twice.
一些公司，如马莎百货（Marks&Spencer）和荷兰皇家壳牌（RoyalDutchShell），甚至有超过分红两倍的收益。 - The utility model discloses a portable electronic device capable of weighing, which comprises a shell, a transparent cover body, a display, a main board and a weighing sensor;
本实用新型公开了一种可称重的便携电子装置，包括机壳、透明盖体、显示器、主板和称重传感器； - The outer cover is used for closing the opening of the outer shell, and the outer cover is provided with a cover body and a positioning part formed at the cover body.
该外盖闭合该外壳的开放口，并具有一盖本体，及一形成于该盖本体的定位部； - Computer simulation and experiment results indicate that the automatic cladding method of spherical shell cover is feasible, mathematical model is correct.
并进行了计算机仿真和堆焊试验，试验结果表明，封头自动堆焊方案可行，数学模型正确。 - The 4 node quadrilateral shell element with an one point integration is employed in the model of safety cover of grinder.
采用显式时间积分格式，磨床安全防护罩采用一点积分的4节点双线性壳单元。 - Analysis and control of internal stress in shell and cover of plastic alkaline storage battery
碱性蓄电池塑料壳盖内应力分析及控制 - Repair of Upper Shell Cover 3203-C in High-pressure Syringe of Urea Production
尿素高压洗涤器3203-C上封头修复 - And the result showed that eggshell intensity could be relative with the thickness of shell membrane, fibers of shell membrane, spacing of cone layer and cranny of cover.
同时研究结果表明，鸡蛋壳强度的大小可能与壳膜层壳膜的厚度，壳膜纤维的粗细，锥体层乳头间的空隙大小以及覆盖层上裂隙的深浅和数量有关。 - Mathematical model for automatic cladding of spherical shell cover
球形封头自动堆焊数学模型的建立 - The characteristics of particular engineering plastics polysulfone ( PSU) are presented, and the PSU shell body and cover of alkaline storage battery are formed by injection molding.
介绍特种工程塑料聚砜（PSU）的特性，采用注射成型工艺制备了碱性蓄电池壳体、壳盖。 - The removing of shell and inner cover of Chinese chestnut, the first working procedure in chestnut deep processing, is always the technique difficulty to be resolved, which has become a restricting factor in Chinese chestnut processing industry.
栗果的脱壳去衣是板栗深加工的头道工序，历来是板栗加工的技术难题，已成为发展板栗加工业的制约因素。 - The Practice of the Repair Welding for the Cracks on the Shell Cover of Raw Coal Ball Mill
原煤球磨机端盖裂缝补焊修理实践 - A flat ribbon wound pressure vessel is made up of a thin inner shell, flat steel ribbon layers that are cross-helically wound outside the inner shell, a top cover and a bottom cover, etc.
扁平绕带高压容器是由内筒、交错缠绕在内筒外的钢带层、端盖和封头等组成的新型壳体结构。 - Analysis of Affecting Factors on the Impact Strength of Shell and Cover of Plastic Alkaline Storage Battery
碱性蓄电池壳盖冲击强度影响因素分析 - Three-Dimension Finite Element Analysis to the Temperature and Stress Field on Welding the Shell Cover of Mill
磨机筒体盖面层焊接温度场、应力场三维有限元分析 - Plate and shell structures are widely used in engineering fields. They can not only cover large design space, but also have strong flexibility in shape. Therefore, they are quite popular with engineers.
板壳结构在工程领域应用非常广泛，它们不仅能够覆盖较大的设计空间，而且在造型上还具有很强的可塑性，因而倍受广大工程设计人员的欢迎。 - Side periscope shell cover is more important body parts, the parts installed in the periscope convex on both sides of the main shell of the platform.
侧罩是潜望镜外壳体上较为重要的零件，该零件安装在潜望镜主壳体的两侧凸台上。 - It introduces test study deformation stiffness for shell parts and decides that the equipment used payload-deflection curve slope to cover the initial point of stiffness evaluation index by analyzing the results of the trial.
采用扁壳类零件进行变形刚度的试验研究，通过分析试验结果，确定了本仪器采用载荷-挠度曲线初始点斜率为薄板件刚度评价指标。 - Therefore, many countries have drawn up the corresponding standard in pressure vessel especially for the head to the shell cover processing quality.
因此，各国针对各行业中的压力容器尤其对封头的加工质量都制订了相应的标准。